Basic Info.
Model NO.
SUN-2000G2-WAL-H
Product Name
Grid Tie Wind Turbine Inverter
Key Word
Wind Turbine Inverter
Nature of Source Flow
Active Inverter
Circuit Topologies
Push-pull Type
Nature of Wave String
Sine Wave Inverter
After-sales Service
on/ off Line
Transport Package
1PCS/CTN
Specification
Packing: 54*31*15.5(cm)
Product Description
LCD Display 1000W With Limiter Sensor Wind Inverter On Grid Tie Invertor 230V 50/60Hz Output
3 phase Grid Tie Wind Turbine Inverter on Grid 1000W
Wind Turbine Grid Tie Inverter ModelsTable 1, DC Input Inverter Models| Model | Rated Power
(Max./Continuous) | DC Input
Voltage | AC Output
Voltage | AC Output
Frequency | Max. | Efficiency | Night
Power Consumption |
| | | | 95V~140V | 50/60Hz | | |
| SUN-1000G2-WDL-M | 1000W / 900W | 22V~65V | | | 90% | 0.5W |
| | | | 185V~265V | 50/60Hz | | |
| | | | 95V~140V | 50/60Hz | | |
| SUN-1000G2-WDL-H | 1000W / 900W | 45V~90V | | | 92% | 1.5W |
| | | | 185V~265V | 50/60Hz | | |
| SUN-2000G2-WDL-H | 2000W / 1850W | 45V~90V | 185V~265 | 50/60Hz | 92% | 1.5W |
Table 2, Three Phases Input Inverter Models | Model | Rated Power
(Max./Continuous) | DC Input
Voltage | AC Output
Voltage | AC Output
Frequency | Max. | Efficiency | Night
Power Consumption |
| | | | 95V~140V | 50/60Hz | | |
| SUN-1000G2-WAL-M | 1000W / 900W | 22V~65V | | | 90% | 0.5W |
| | | | 185V~265V | 50/60Hz | | |
| | | | 95V~140V | 50/60Hz | | |
| SUN-1000G2-WAL-H | 1000W / 900W | 45V~90V | | | 92% | 1.5W |
| | | | 185V~265V | 50/60Hz | | |
| SUN-2000G2-WAL-H | 2000W / 1850W | 45V~90V | 185V~265 | 50/60Hz | 92% | 1.5W |
We call a system combining with a small grid tie inverter and a wind turbine as "SGWT". The system includes a wind turbine and a small grid tie inverter, and a set of the installation kit. Some "SGWT" also will include a controller, dump load resistor.
The inverter can be connected to any outlets of the utility grid at the house. The small grid tie inverter monitors the volume, frequency, and phase of the home utility grid, producing pure sine wave AC power that the frequency and phase are the same as the grids. The volume is a bit higher than the grid's, then according to the current-controlled PWM, to control the output power to the grid. The small grid tie inverter puts out power when the home grid is on.
When the wind turbine is rotating, and its output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produce power, and the grid tie inverter will change the power from the wind turbine to the home grid. When the total power of the electric appliance that is using in the house is
larger than the output power of the inverters, this power from the inverters will be consumed in the house. This will slow down the power meter; otherwise, the difference of the output power of the inverter between the total used power of the appliance will go out from the house to the out grid.
Installation Procedure- Considering the total capacity of the grid tie power system that you need
- Choosing an applicable wind turbine for Sunshine Grid Tie Inverter
- Selecting a set of accessory for installation of the Grid Tie Power System
- Selecting the correct model of Sunshine Grid Tie Inverter
- Installing the wind turbine to a suitable place
- Installing Sunshine Grid Tie Inverter to a suitable place
- Connecting Sunshine Grid Tie Power System with cables and connectors
- Grounding the system
Step1. Considering the total capacity of the grid tie power system that you need.
The whole grid tie power system's total capacity is according to your power consumption in
the site you want to install, or how much power you want it to feed to the utility grid. The volume is just according to your will because when the total power of electric appliances used in the installation site is larger than the output power of the grid tie power system, this power from the system will be consumed in the site, this will slow down the power meter; otherwise, the difference of the system's output power between the total used power of the appliances will feed to the utility grid.
For example, suppose you want to install a grid tie power system in your house. In that case, you could decide the total power volume according to the total power the appliances that you use in your house, maybe the consumption of total energy per day is about 5KWH. You should realize the averaged speed of the wind per day at your site, check the power to the speed of the wind curve from the specifications of the wind turbine, then you can estimate the average power that the wind turbine can generate, actually the real average power the wind turbine can generate at your side is not easy to estimate, you need to check the history data of the climate because it will vary every day according to the climate, just assume a 1KW rated wind turbine is suitable for the grid tie power system that you plan to set, with this capacity of the system, it can supply all power consumption in the whole year. When the grid tie power system is working, sometimes, there is extra power feed to the utility grid if the power from the grid tie system is larger than the power consumed by the appliances in your house, and sometimes will not when it is not larger. If you use a 1KW wind turbine, then we call the "GTWT" system is a 1KW grid tie power system. Of course, you can install a 500W grid tie power system or a 2KW grid tie system, even more large capacity or more small capacity grid tie system, it doesn't matter. But if the capacity is too big, you should consider the volume of the AC system of your house, whether it can hold the fed power or not.
Step2. Choosing Applicable Wind Turbine For Wind Turbine Grid Tie Inverter
Intelligent Manufacturing
According to the requirements of production, our company cooperated with automation equipment suppliers to develop automation equipment for the production. Automation equipment reduced work intensity of employees on the production line and improved production efficiency by 30%, all of which saved the cost of production.
Founded in 1996, Ningbo Development Zone Hengda Electrical Co., Ltd. is a provincial hi-tech enterprise and specialized in the R&D, manufacture and sales service of lighting fittings and solar energy PV modu-le connectors. Our company is situated in Beilun Dagang Industrial Town of Ningbo Development Zone which enjoys flourishing import and export trade business, convenient transportation and harbor advantages. Our company covers an area of 15mu (about 10,005 square meters) and our building area is over 10,000 square meters with registered capital of 1.68 million USD and total investment of 3.68 million USD. Relying on our experience for a dozen of years in lighting fitting production management and economic strength, we produce both a fu-ll variety of new energy-saving lighting fittings and solar energy PV modu-le connectors. Our annual output of lighting fittings is over 80,000,000 pieces with product certifications of CQC, U-L, VDE, CE, CSA and RoHS. Solar energy PV modu-le industry grows rapidly along with the ever-worsening global energy shortage. Aiming at this industry, Hengda has employed talented personnel, introduced advanced equipment and technology and began to research and develop solar energy PV modu-le junction boxes and connectors since 2004. Hengda had invested over five percent of the annual sales amount in the R&D of new products for the past four years and successfu-lly developed more than ten varieties of solar energy PV modu-le junction boxes and connectors. By estimate, we will produce more than 1.5 million sets of solar energy PV modu-le connectors in 2008. Our products have been identified by German TUV testing and are up to the safety requirements of European electric apparatus of the second category. Meanwhile, Hengda is concentrating on developing and promoting our proprietary brand of "TOP," which has won considerably domestic market share and a stable client base. Our products sell well in the EU, Korea, Taiwan Area and other countries and regions. Innovation goes on as it never ends. Based on the development and design concept of "making the unique and the best products", Hengda tries to grasp the market trend and targets at the market potential to launch new products relying on current technical achievements. Hengda now is developing amorphous silicon solar modu-les and junction boxes and connectors used for glass curtain walls to keep pace with new technology advancement and to meet market demands. Moreover, Hengda has obtained the certificates of ISO9001:2000 Quality Management System and ISO14001 Environmental Management System, and built a complete internal management system by observing the systems rigorously to assure product quality and their technical level.
Packing: Customized packing, Can be designed according to customer's requirements, manual can be multi-languages, add customer logo, etc.
Delivery: We can do EXW, FOB, CIF, CNF, DDA, DDP service for most of the countries all over the world.
Q1: How to insatll and use the inverter?
A1: We have the English teaching manual and videos; All the videos about every step of machine Disassembly, assembly, operation will be sent to our customers.
Q2: What if I don't have export experience ?
A2: We have reliable forwarder agent which can ship items to you by sea/air/Express to your doorstep.Any way, we will help you choose the most suitable shipping service.
Q3:Can you provide the free shipping to sea port ?
A3:Yes, we provide the free shipping to your convenient sea port.If you have agent in China, we can also ship it to them for free.
Q4: How is your technical support?
A4: We provide lifetime online support through Whatsapp/ Skype/ Wechat/ Email. Any problem after delivery, we will offer you video. call anytime,our engineer will also go to oversea help our customers if necessary.
Q5: How can I make sure it's a secure transaction ?
A5: Alibaba can protect buyers' interest, all of our transation will go through alibaba platform.As you do the payment, the money will go directly to Alibaba bank account.After we send you the items and you comfirm the detailed information, Alibaba will release us the money.
Q6: Can you get the the solar inverter customized for us ?
A6: Of course, brand name, machine color, designed unique patterns available for customization.
Q7:How to become your agent?
A7:Contact us through Alibaba, we will give you the best price and look forward to your greetings
Address:
58 Nanhai Road, Beilun District, Ningbo City, Ningbo, Zhejiang, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Lights & Lighting, Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
Founded in 1996, Ningbo Development Zone Hengda Electrical Co., Ltd. is a provincial hi-tech enterprise and specialized in the R&D, manufacture and sales service of lighting fittings and solar energy PV module connectors.
Our company is situated in Beilun Dagang Industrial Town of Ningbo Development Zone which enjoys flourishing import and export trade business, convenient transportation and harbor advantages. Our company covers an area of 15mu (about 10, 005 square meters) and our building area is over 10, 000 square meters with registered capital of 1.68 million USD and total investment of 3.68 million USD.
Relying on our experience for a dozen of years in lighting fitting production management and economic strength, we produce both a full variety of new energy-saving lighting fittings and solar energy PV module connectors. Our annual output of lighting fittings is over 80, 000, 000 pieces with product certifications of CQC, VDE, CE and RoHS.
Solar energy PV module industry grows rapidly along with the ever-worsening global energy shortage. Aiming at this industry, Hengda has employed talented personnel, introduced advanced equipment and technology and began to research and develop solar energy PV module junction boxes and connectors since 2004.
Hengda had invested over five percent of the annual sales amount in the R&D of new products for the past four years and successfully developed more than ten varieties of solar energy PV module junction boxes and connectors. By estimate, we will produce more than 1.5 million sets of solar energy PV module connectors in 2008.
Our products have been identified by German TUV testing and are up to the safety requirements of European electric apparatus of the second category. Meanwhile, Hengda is concentrating on developing and promoting our proprietary brand of "TOP, " which has won considerably domestic market share and a stable client base. Our products sell well in the EU, Korea, Taiwan Area and other countries and regions.
Innovation goes on as it never ends. Based on the development and design concept of "making the unique and the best products", Hengda tries to grasp the market trend and targets at the market potential to launch new products relying on current technical achievements. Hengda now is developing amorphous silicon solar modules and junction boxes and connectors used for glass curtain walls to keep pace with new technology advancement and to meet market demands.
Moreover, Hengda has obtained the certificates of ISO9001: 2000 Quality Management System and ISO14001 Environmental Management System, and built a complete internal management system by observing the systems rigorously to assure product quality and their technical level.
){kind=link}